Each sensor has a 2 row DB-9 connector at the end of the cable.
The sensors has some light scratches on the plastic housing.
|
Model |
AP-32A |
|||
|
Type |
Positive pressure |
|||
|
Analog |
||||
|
Rated pressure |
0 to 100.0 kPa |
|||
|
Proof pressure |
72.5 PSI |
|||
|
Pressure type/applicable fluids |
Gauge pressure, air or non-corrosive gases |
|||
|
Display |
3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm) |
|||
|
Display resolution |
0.1 kPa (0.001 bar) |
|||
|
Detectable pressure range |
-15% to +110% of F.S. |
|||
|
Response time |
2.5/5/100/500 ms (selectable) |
|||
|
I/O |
Control output |
Maximum NPN open-collector output: 100 mA (40 V or less), residual voltage: 1 V or less, N.O./N.C. switchable |
||
|
Analog output |
1 to 5 V (Load impedance: 47 kΩ min.) |
|||
|
I/O |
Zero-shift input |
- |
||
|
Control output hysteresis |
Variable (when hysteresis mode is selected), 0.5% of F.S. in standard mode |
|||
|
Power supply |
12 to 24 VDC ±10% |
|||
|
Ambient temperature |
0 to 50°C (32 to 122°F), No condensation |
|||
|
Vibration resistance |
10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours respectively |
|||
|
Material |
Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone,Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable |
|||