Manufacturer: Festo
Description: Air-Gas Flow Sensor
Part No: 563795
SFAB-50U-WQ8-2SA-M12
Condition: New surplus item that comes in manufacturer's packaging.Description: Air-Gas Flow Sensor
- Measured variable - Mass flow rate, Temperature, Volume, Volumetric flow rate
- Flow direction - Unidirectional P1 -> P2
- Measuring principle - Thermal
- Method of measurement - Heat loss
- Flow measuring range start value - 0.1 l/min ... 10 l/min
- Flow measuring range end value - 3 l/min ... 1000 l/min
- Temperature measuring range start value - 0 °C
- Temperature measuring range end value - 50 °C
- Operating pressure - 0 MPa ... 1 MPa
- Operating pressure - 0 bar ... 10 bar
- Operating pressure - 0 psi ... 145 psi
- Operating medium - Argon, Compressed air as per ISO 8573-1:2010 [6:4:4], Compressed air as per ISO 8573-1:2010 [7:4:4] ,Carbon dioxide, Nitrogen
- Temperature of medium - 0 °C ... 50 °C
- Ambient temperature - 0 °C ... 50 °C
- Nominal temperature - 23 °C
- Accuracy of flow rate - ± (3% o.m.v. + 0.3% FS)
- Accuracy of temperature in ± °C - 5 °C
- Zero point repetition accuracy in ± % - FS0.2 %FS
- Repetition accuracy margin in ± % - FS0.8 %FS
- Temperature co-efficient margin in ± %FS/Ktyp. 0. 1%FS/K
- Pressure influence of margin in ±%FS/bar0.5 %FS/b.
- Switching outpu - t2 x PNP or 2 x NPN switchable
- Switching function- Window comparator Threshold value comparator
- Switching element function - N/C contact/N/O contact switchable
- On time - 10 ms
- Switch-off time -10 ms
- Max. output current - 100 mA
- Analog output - 0 - 10 V 4 - 20 mA 1 - 5 V
- Flow characteristic curve, start value - 0 l/min
- Flow characteristic curve, end value - 10 l/min ... 1000 l/min
- Temperature characteristic curve start value - 0 °C
- Temperature characteristic curve end value - 100 °C
- Output characteristic curve initial value - 0 V
- End value output characteristic curve - 10 V
- Output characteristic curve initial value - 4 mA
- End value output characteristic curve - 20 mA
- Max. load resistance of current output - 500 Ohm
- Min. load resistance of voltage output -10 kOhm
- Short-circuit protection - yes
- Overload protection - Available
- Protocol - IO-Link®
- IO-Link, revision IDV1.1